Page 1
CS1W-NC271/471/F71 - MECHATROLINK-II Position control unit Multi-axis point-to-point positioning controller over MECHATROLINK-II motion bus • Position control units with 2, 4 or 16 axes. • High-speed bus MECHATROLINK-II is specially designed for motion control. • Supports position, speed and torque control.
Page 2
Compensates for the amount of play in the mechanical system according to a set value. Deviation counter reset The position deviation in the servo drive’s deviation counter can be reset to 0 (unit version 1.3 or later). External I/O Position control unit...
Page 3
CS1W-NC271/471/F71 - Position control unit LED indicators MLK - MECHATROLINK-II network status RUN - Controller in RUN ERC - Position control unit error ERH - PLC CPU unit error ERM - MECHATROLINK-II slave unit error UNIT No. setting switch MECHATROLINK-II communications connectors:...
Page 4
CX-One version 1.1 or higher CX-One ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. Cat. No. I10E-EN-02A...