Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Knoll Manuals
  4. Indoor Furnishing
  5. Antenna Telescope
  6. Installation instructions manual

Knoll Antenna Telescope Installation Instructions Manual

Hide thumbs Also See for Antenna Telescope:

Advertisement

Quick Links

Download this manual
Knoll Office
Antenna
Telescope
®
™
Installation Instructions and
Parts Manual

Advertisement

loading

Related Manuals for Knoll Antenna Telescope

Summary of Contents for Knoll Antenna Telescope

  • Page 1 Knoll Office Antenna Telescope ® ™ Installation Instructions and Parts Manual...
  • Page 2 POWER AND CABLE MANAGEMENT Telescope Power Strip Telescope 120 Power Strip Telescope Z-Managers Telescope Hinged Cleat Plate Covers Telescope Hinged Cleat Plate Covers for 120 Degree Application Telescope Communications Mounting Plate Telescope Dual Utility Tray Covers ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 3 9. Electrically interconnected furnishings must be mechanically interconnected. 10. While routine maintenance checks & fastener adjustments are recommended, there are no user-serviceable component parts in the Telescope Motorized Table. Contact your Knoll Dealer or go to www.knoll.com for repair service guidance. GROUNDING INSTRUCTIONS Double Insulated or class 2 electrical products that have been designed not to require a safety connection to electrical earth (These products...
  • Page 4 6. Complete a Knoll Service order, Please refer to the Finish Code listing in the which can be sent to your Knoll Antenna™ Workspaces Price List for the Customer Service Representative. available finish codes for those products.
  • Page 5 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) 5/16-18 x 2" Button Head Hex Machine Screw (O) J2 Standard up/down: 3AF4102 (M) 7189140 (K) 7528496 (L) 4A22212 (P) Toggle Handset: (N) 4A22216 (O) 4A22214 3AF4248 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 6 Allen Wrench Rubber Mallet 5/32", 3/16", 1/4" hex bit sockets Ratchet Torque Wrench (150 in-lb) for 3/16" Hex Bit Socket 4mm Allen Wrench Level (or laser level) (EE) 3AF4010* (DD) 3AF4090 (CC) 7418440 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 7 Telescope Dual Table Bases with Beam (with or without Dual Utility Trays) - Standard Electric Dual Table Assembly With Beam and Dual Utility, End Position, Plan View Dual Table Assembly With Beam and Dual Utility ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 8 Desk Rails Center Beam Upper Housing Box Dual Utility Tray Column Leg Assembly Crossbar Dual Table Assembly With Trays and Beam, End Position Exploded View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 9 (A/B), with (2) 5/16-18 x 1 1/4" button head orient the bracket as shown in the above hex machine screws (L) per cradle. image. Lower the column and disconnect the power supply from the building power, then from the leg. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 10 Turn assembly right 8. Turn the large beam/crossbar “I" assembly side up. upside down. Position the (4) legs upside down as well, and in their relative positions at the ends of the crossbars. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 11 5/8" flat head Phillips machine screws (M) on a crossbar assembly. Position the rails opposite crossbar assembly and repeat per cradle. so that the end cap (T) sticks out past the the above tightening procedure. cradle by ¼". ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 12 Power Supply. Repeat the procedure above for the opposite pair of columns. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 13 1/2", install the Helical Glide Shroud. See convenient to raise the station to make slide to engage the keyhole slots. Helical Glide Installation Instructions. room for the power driver. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 14 See Cleat Plate and Cleat Plate Cover the underside of the worktop, at the front Installation Instructions. edge. INSTALL Z-MANAGER ACCESSORY ATTACH RETURNS (WHERE (WHERE APPLICABLE) APPLICABLE) See Z-Manager Installation Instructions. See Telescope Return Base Installation Instructions. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 15 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) 5/16-18 x 2" Button Head Hex Machine Screw (O) J2 Standard up/down: 3AF4102 (M) 7189140 (K) 7528496 (L) 4A22212 (N) 4A22216 (O) 4A22214 (P ) Toggle Handset: 3AF4248 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 16 Allen Wrench Rubber Mallet 5/32", 3/16", 1/4" hex bit sockets Ratchet Torque Wrench (150 in-lb) for 3/16" Hex Bit Socket 4mm Allen Wrench Level (or laser level) (EE) 3AF4010* (DD) 3AF4090 (CC) 7418440 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 17 Telescope Dual Table Bases with Beam (with or without Dual Utility Trays) - Extended Electric Dual Table Assembly With Beam and Dual Utility, End Position, Plan View Dual Table Assembly With Beam and Dual Utility ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 18 (with or without Dual Utility Trays) - Extended Electric Desk Rails Center Beam Upper Housing Box Dual Utility Tray Column Leg Assembly Crossbar Dual Table Assembly With Trays and Beam, End Position Exploded View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 19 Right Hand screws (M) per shelf. w and Left Hand Column Leg Assemblies (A/B), with (2) 5/16-18 x 1 1/4" button head hex machine screws (L) per cradle. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 20 Turn assembly right 8. Turn the large beam/crossbar “I" assembly side up. upside down. Position the (4) legs upside down as well, and in their relative positions at the ends of the crossbars. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 21 12. Prepare the leg cradles for the rails by with the face of the housing cover (E). fastening (2) Cradle Clamp Brackets (D) loosely to each cradle (C) using (4) ¼-20 x 5/8" flat head Phillips machine screws (M) per cradle. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 22 Tighten the two ports out past the Power Supply. screws with an Allen wrench. Repeat the procedure above for the opposite pair of columns. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 23 1/4 -20 x 3/4" flat head machine screw (WHERE APPLICABLE) convenient to raise the station to make (CC). See Z-Manager Installation Instructions. room for the power driver. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 24 1. Drop one ballast kit into both the Follow steps 9-10 to connect Right Hand and Left Hand Column crossbars to legs. Leg Assemblies. DO NOT REMOVE Follow steps 11-12 to install rails. THE BALLAST FROM THE BAG. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 25 A NTENN A TELESCOPE ® ™ Telescope Dual Table Bases with Mixed or Fixed Base Electric, Height- Adjustable Side Fixed Side Dual Table Assembly with Mixed Base, Plan View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 26 Rigth Hand Fixed Leg Assembly Left Hand Fixed Column Leg Assembly Dual Table Assembly with Mixed Base, Axonometric View Drop Ballast into Column Leg Assembly. Do not remove it from the bag. Fixed Column Leg Detail ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 27 J2 Standard up/down: #14 x 1" Flat Head Wood Screw (R) 3AF4102 (J) 7528496 (K) 4A22212 (L) 7189140 (M) 4A22216 (N) 4A22214 (O) 4A22215 (P) 3AB401252 (Q) 7196440 (R) 7434100 (S ) Toggle Handset: 3AF4248 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 28 Tools Needed: Power Driver Phillips #2 and #3 Bits ", ", ¼" hex bit sockets Ratchet Torque Wrench (150 in-lb) for " Hex Bit Socket 4mm Allen Wrench Level (or laser level) Rubber Mallet ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 29 Telescope Single Sided Table Bases with Beam (with or without Utility Tray), Stand-Alone Application Single Sided Table Assembly with Beam and Ulitity Tray Plan View Sinlge Sided Table Assembly with Beam and Utlity Tray, Axomometric View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 30 (with or without Utility Tray), Stand-Alone Application Desk Rails Back Panel Center Beam Upper Housing Box Crossbar Column Leg Assembly Utility Tray Exploded Single Sided Table Base Assembly with Beam and Utility Tray, Overview ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 31 Lower the column and disconnect the power supply from the building power, then from the leg. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 32 Tighten the (2) pairs of flat head one another. Attach a Center Beam machine screws previously left loose. Mounting Plate (T) to the inner side of Turn the assembly right side up. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 33 Philips machine screws (CC) per .75" button head hex machine screws bracket, from below the crossbars. (DD) each. Tighten the (2) M6-10mm button head hex machine screws (FF) in underside of the beam. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 34 NOTE: The cradle clamp brackets (E) are ALWAYS to be placed in the outer position in the cradle (D), and the end is to be flush with the face of the housing cover (F) ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 35 Transformer Shelf; use of there are no issues with the columns. a splitter cable is needed. The splitter fits into the one housing port and provides two ports out past the Power Supply. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 36 30. Attach tops using (4) #14 x 1" flat Switch (I) to the underside of the head wood screws (R) per cradle. worktop, at the front edge. See Cleat Plate and Cleat Plate Cover Installation Instructions. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 37 (with or without Utility Tray), Stand-Alone Follow steps 27-28 to perform a reset Application, and complete the following for the pair of columns in each station. steps for each table to be connected. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 38 (with or without Utility Tray), Side by Side Application Single Sided Table Assembly with Beam and Utility Tray, Side by Side Application, Plan View Single Sided Table Assembly with Beam and Utility Tray, Side by Side Application, Axonometric View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 39 Upper Housing Box Back Panel Connector Link Crossbar, "Connected" Location Utility Tray Column Leg Crossbar, "End" Assembly Location Exploded Single Sided Table Base Assembly with Beam and Utility Tray, Side by Side Application, Overview ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 40 " beneath Cover Installation Instructions. the head of the screws. Place the wire Follow step 31 to affix handset. hanger over the heads of the screws and slide to engage the keyhole slots. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 41 4A22212 Telescope Base, Height Adjustable Extended J2 Standard up/down: 3AF4102 Electric, with Beam and Dual Trays, 1 3AF4103 C1 KNOLL DIGITAL HANDSET 3AF4102 C2 KNOLL STANDARD HANDSET 3AF4103 C1 KNOLL DIGITAL HANDSET 3AF4102 C2 KNOLL STANDARD HANDSET Crossbar Connection, YBTYEXBT1_ _...
  • Page 42 31"= KRAE4027 63"= KRAE4029 78"= KRAE4030 Power Supply w/ Splitter: KR3AF5045 Power Cord: KR68005498 Splitter: KR3AF5044 (KK) 3AF417901* (LL) Mini Crossbar Rails (varies) Table Tops, Veneer or Laminate Center Beam Dual Utility Trays ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 43 (with or without Dual Utility Trays) 120 Triad Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Plan View 120 Triad Table Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Axon View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 44 Housing Box Mini Crossbar 120 Degree Column Leg Assembly Center Beam Dual Utility Tray Crossbar Column Leg Assemblies, LH/RH 120 Triad Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Partially Exploded Overview ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 45 Repeat steps 1-3 for all three as shown in the above image. Lower the pairs of outer legs column and disconnect the power supply from the building power, then from the leg. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 46 Allow the screws to seat in the counter one another (towards the center of the Repeat for the other two outer leg sets. sinks and perform the next steps. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 47 (M) per Y Bracket. Repeat for other two 120 Degree Column Leg Assemblies (FF). 12. Add (3) Mini Crossbars (LL) to the triangular structure, using (2) ¼-20 " flat head Phillips machine screws (M) per crossbar. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 48 (W) into both tabs on mounting plate (U), and secure by the sides of all three plates (U), such tightening the set screws (W) with a 4mm that the hex recesses are outward. hex driver. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 49 (D) to each cradle cavity (GG/HH) performance issues can occur. (C) with (4) ¼-20 x " flat head Phillips with (4) 1/4-20 x " flat head Phillips machine screws (M) per cradle. machine screws (M) per cavity. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 50 " Flanged Button Head Hex Machine Screws (X) Outer Crossbar 120 Triad Table, Utility Tray Installation, Steps 23 & 24 Power Supply Holder (63 mm) Splitter Plug power supply directly into middle leg ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 51 (D). Repeat for the other side of that center the head of the screws. Slip the Utility beam and for the other two center Tray between the outer crossbar and beams. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 52 Fasten the connector links to the linking INSTALL Z MANAGER ACCESSORY brackets with a ¼ -20 x ¾" flat head (WHERE APPLICABLE): machine screw (CC) at each end. See Z-Manager Installation Instructions. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 53 Machine Screw (CC) Step 33 ¼-20 x ¾" Flat Head Step 32 Machine Screw (CC) Connector Link (EE) Wire Hanger (DD) ¼-20 x ¾" Button Head Machine Screw (V) Attaching Connector Links, Detail, Steps 31-33 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 54 (P) 3AB401252 5/32", 3/16", 1/4" hex bit sockets (N) 7189140 (O) 4A22212 Ratchet Torque Wrench (150 in-lb) for 3/16" Hex Bit Socket 4mm Allen Wrench Level (or laser level) (S) 7528496 (Q) 7196440 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 55 Dual table Assembly with Return on One Side, Plan View Note: Follow installation steps for Telescope Dual Table Bases before proceeding with the assembly of the return. Dual table Assembly with Return on One Side ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 56 RE TUR N BASES Telescope Return Bases Shorter Return Rail Longer Return Rail (Use Front) Upper Housing Box Return Column Assembly Exploded Return Base Assembly, Overview ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 57 (B), and the end is to be flush with the face of the housing cover (D). upper housing box on the Return Column Assembly (A), with (2) -18 x 1 1/4" button head hex machine screws (O) per cradle. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 58 7. In the shorter of the two return rails, Position the rails so that the end cap install an End Cap with Support Tab (I). (J) sticks out past the cradle by ¼". ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 59 #12 x ¾" Flat Head Black Wood Screw (Q) Step 12 Return Rail Clamp Bottom Bracket (H) ¼-20 x 1" Flat Head Machine Step 15 #14 x 1" Flat Head Wood Screws (L) Telescope Return Bases Diagram ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 60 18. Using (2) #6 x 5/8" wood screws (S) mount the Handset Control Switch to the underside of the return top or the primary top, at the front edge. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 61 (F) to the long sides of each housing, using Flat Head Machine Screw (L) per clip. ¼-20 x ¾" flat head machine screws (I) at (2) 5/16 – 18 x 2.25" Phillips head machine each connection point. screws (K) per bracket. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 62 At the other leg, Insert splitter into one housing port. Plug the iDrive cable from the other leg into one splitter port. Y-Base Adjustable Height Table, Assembled ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 63 End Cap (B) Hex Socket Machine Screw (H) Step 3 Glide Assembly (A) Step 2 ¼-20 x ¾" Flat Head Machine Screws (I) Y-Base Table, Dual Base Assembly, Partially Exploded View, From Below, Steps 1-4 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 64 Housing Cover (C) Top Support Bracket, Left Hand (E) Step 6 ¼ - 20 x " Flat Head Machine Screw (J) Y-Base Table, Dual Base Assembly, Partially Exploded View, From Below, Steps 5-8 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 65 Cable Step 11 Power Cord Power Supply Step 11 Power Supply Plug Transformer Shelf (D) Step 10 Step 9 Handset Cable Handset Control Y-Base Table, Dual Base, Electrical Components Installation, Steps 9-11 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 66 Step 12 #14 x 1" Flat Head Wood Screw (M) Step 13 Glide Assembly (A) Step 16 #6 x " Wood Screw (N) Y-Base Table, Dual Base, Top and Handset Installation Steps 12-17 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 67 2. Attach (2) Dovetail Linking Brackets (B) x .5", Black Flat Head Screw (I). 3 to the predrilled holes in the center of the end panel, using (2) ¼ -20 x .75" Flat Head Machine Screws (G) per bracket. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 68 Telescope End Panels for Dual Tables End Panel Adjustable Dual Tables (Intermediate Application Base) Telescope End Panels, Installed End Panel Adjustable Dual Tables (End Application Base) Single Telescope End Panel, Installed on Single Table ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 69 Machine Screws (G) (previously installed) Step 9 Step 1 & 8 ¼-20 x .5", Black End Panel Connector Link (A) Flat Head Screw (I) Conector Link Connection to Crossbar, Steps 1, 8, & 9 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 70 ¼-20 x 1.25" Flat Head Adjustable Dual Step 6 Machine End Table ¼ - 20 x .5", Black Screw (H) Flat Head Screw (I) Conector Link Connection to Crossbar, Steps 1, 8, & 9 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 71 ", ¼" Hex Bit Sockets Ratchet Torque Wrench (150 in-lb) for 3/ " Hex Bit Socket 4mm Allen Wrench Right-Angle Ratcheting Power Driver with #3 Phillips Bit Level (or Laser Level) Rubber Mallet ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 72 Follow steps 27-28 to perform a reset the End Panel to the base and should be for the pair of columns in each station. discarded for this end-panel application. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 73 Leg Brace Crossbar, "End Panel" Location Crossbar, "End" Location Column Leg Assembly Utility Tray Single Sided Base Assembly with Back & End Panels, Exploded View, RH Back Panel, RH End Panel, LH Base Shown ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 74 Links (A) down onto the linking using (2) ¼ -20 x .75" Flat Head brackets attached to the crossbar. Machine Screws (G) per bracket. Do not fasten from below yet. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 75 See Power Strip Installation Instructions. per linking bracket, from below. ¼-20 x .5", Black Flat Head Screw (I). INSTALL CLEAT PLATE & CLEAT PLATE COVER ACCESSORIES (WHERE APPLICABLE): See Cleat Plate and Cleat Plate Cover Installation Instructions. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 76 3. Determine the desired screen position brackets (A) and push the screen down until the screen is firmly seated. along the width of the table, and adjust/ slide the location of the bayonet mount ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 77 SCREENS Telescope Fixed Center Screen, Fabric Fixed Center Screen, Fabric Telescope Tables Assembly Fixed Center Screen, Fabric, Installed ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 78 Mount Bracket Assembly Exploded Telescope Table (Partial) with Fabric Screen Step 2 M6-1 x 25mm PNDR Machine Screw (C) Bayonet Mount Bracket (A) Step 1 Spring Nut (B) Bayonet Mount Bracket Assembly Detail ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 79 11. Finally, tighten the clamping screws, from optional alignment trim for glass screens. below, ensuring each screen is plumb and in good alignment with adjacent screens. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 80 Lower Beam Slot the lower beam slot. Repeat for each screw location. Detail of Drilling Through the Beam for Clamp Screws Step 1 & 2 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 81 Glass, Laminated or Veneer Screen Step 3 Spring Nut (A) NOTE: Tab removed Washer (C) Step 4, 6 & 11 M6 x 35mm Button Head Machine Screw (B) Clamp Screw Hardware Kit Installation Detail ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 82 SCREENS Telescope Fixed Center Screen, Glass, Laminate or Veneer Vertical Alignment Trim Adhesive Tape Tape Liner (peel from tape) Alignment Trim Detail Alignment Trim Alignment Trim Installation shown on Multiple Glass Screen Installation ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 83 Connect the the clamp assemblies approximately Upper Mount Management Bracket (B) to the Upper Mount Top Bracket (A) 19" apart, centered on the rear rail. using the #8 x 1½" pan head screw (I). ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 84 Telescope Table Hex Socket Flat Rear Rail Head Machine Step 1 Screw (D) Step 2 Step 3 Plug Strip (A) Knurler Collared Thumb Screw (E) Power Strip, Detail, Steps 1-3 Partially Exploded View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 85 POWER A ND DATA M A N AGEMENT Telescope Power Strip Worksuface Spacer Rear Rail Power Strip Power Strip, Detail, Installed, Detailed ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 86 Repeat this assembly with a second set of the same hardware, and space to fix the plug strip into place. the clamp assemblies approximately 8½" apart, centered on the rear rail. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 87 Front Power Strip Clamp (B) & Rear Power Strip Clamp (C), Shown Installed Step 2 Plug Strip (A) Step 3 Knurler Collared Thumb Screw (E) 120 Degree Power Strip, Detail, Steps 1-3 Partially Exploded ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 88 POWER A ND DATA M A N AGEMENT Telescope 120 Power Strip Worksuface Spacer Rear Rail Power Strip 120 Power Strip, Detail, Installed, Detailed ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 89 “Z” is opposite. mount location. With socket cap screw buttons snap into the holes. facing upward, engage the downward facing hooks into the lower edge of the slot on the face of the beam. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 90 Lower Mount Bracket (C). Be sure that the cord channel of the strap assembly is in line with the cord channel of the mount. 14. Lower the table to the desired end-user height. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 91 "Z" configuration NOTE: cords will always lie INSIDE the lower strap bend Z-Managers, Axonometric View From Below, Back to Back Configuration. Note symmetry: "Z" configuration for one user, "S" configuraton for opposite users. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 92 Steps 11 & 13 Socket Head Cap Screw (J) Lower Mount Bracket (C) Beam Lower Mount Steps 4 & 5 Engagement Block (D) Lower Mount Nut (E) Exploded Z-Manager Assembly NOTE: 'Z' orientation shown ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 93 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 94 Back Desk Rail Front Desk Rail Cleat Plate Power Strip Step 5 #6 x " Wood Screw (B) Step 2 Rail Clip (A) Step 3 Cleat Plate Cover Exploded Hinged Cleat Plate Cover ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 95 Front (User Side) Rail #6 x " Wood Screw (B) Rotate to Engage Cleat Plate Cover Hinged Cleat Plate Cover Installation- Section View, Step 4 NOTE: For clarity, the mounted power strip is not shown. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 96 (A). For a 54" or 60"W 120 degree worksurface, the transformer shelf should remain installed, and the cleat plate cover may be centered under the cleat plate. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 97 Power Strip 120 degree worksurface Back Desk Rail Step 2 Rail Clip Step 5 #6 x 5/8" Wood Screw Cleat Plate Cover Exploded Hinged Cleat Plate Cover, Shown with a 48"W 120 Degree Worksurface ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 98 Worksurface Rail Clip (A) Front (User Side) Rail Rotate to Engage Cleat Plate Cover Hinged Cleat Plate Cover Installation- Section View, Step 4 NOTE: For clarity, the mounted power strip is not shown. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 99 (A) with (2) B-32 x .625 flat behind the lip of the data tray. head machine screws (C). Do not tighten screws. Keep the clamping brackets (B) oriented in parallel with the mounting plate. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 100 B-32 x .625 Flat Head Machine Screw (C) Communications Mounting Plate Assembly, Exploded View Step 1 Clamping Bracket (B) Mounting Plate (A) Data Tray Communications Mounting Plate Installation: Rotating the Clamping Brackets Step 2 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 101 POWER A ND DATA M A N AGEMENT Telescope Communications Mounting Plate Communication Communication Mounting Mounting Plate, Plate, Installed Shown Installed with Data Faceplate Telescope Assembly with Dual Utility Trays Installed Telescope Communications Mounting Plate, Installed (2 shown) ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 102 2. Insert the support bracket assemblies into covers for the placement of a Z-manager. the utility tray. They should be positioned so that they will support the tray covers, approximately 3 inches from the edges of the covers. ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 103 (4) Door stop assemblies Telescope table base assembly Data tray cover set, shown installed Center Beam Data Tray (4) Cover support bracket assemblies Telescope Data Tray Covers, Bracket Placement, Plan View, Step 2 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 104 Support Bracket Assembly, Steps 1-4 Center Beam M6-1 Spring Nut (D) Flip Door Stop (C) M6-1 x 14mm Flat Head Machine Screw (E) Telescope Data Tray Covers, Bracket Placement, Plan View, Step 2 ©2021 Knoll Inc. Antenna Telescope Installation Instructions...
  • Page 105 Telescope Dual Utility Tray Covers Data Tray Covers Step 7 Data Tray Covers, Shown Installed Data Tray Telescope Table (4) Cover (4) Door Stop Base Assembly Support Bracket Assemblies Assemblies Data Tray Covers, Partially Exploded View ©2021 Knoll Inc. Antenna Telescope Installation Instructions...