Contents Antenna Telescope ® ™ INTRODUCTION Using the Antenna ® Telescope ™ Installation Instructions and Parts Manual DUAL TABLES Telescope Dual Table Bases without Beam and Dual Utility Trays - Standard Electric Telescope Dual Table Bases with Beam (with or without Dual Utility Trays) - Standard Electric Telescope Dual Table Bases without Beam and Dual Utility Trays - Extended Electric...
6. Complete a Knoll Service order, or veneer finish code must be added to the which can be sent to your Knoll end of the pattern number to be orderable as a Customer Service Representative.
Dual Tables Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Pattern Numbers Represented: (A) Right Hand Leg (B) Left Hand Leg (C) 3AF4004* (D) 3AB4007* 3AF4020* 3AF4021* Telescope Base, Standard Electric, YBTESNNS_ without Beam and Trays, Standalone, Parts List:...
Page 5
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Dual Table Assembly Without Beam, Plan View Dual Table Assembly Without Beam, Axonometric View Antenna Telescope Installation Instructions ® ™ October 2018...
Page 6
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Rails Upper Housing Box Column Leg Assembly Crossbar Dual Table Assembly Without Beam, Exploded View Antenna Telescope Installation Instructions ® ™ October 2018...
Page 7
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric 5/16-18 x 1 1/4" Button Head Hex Machine Screw (L) Horizontal Rail Cradle (C) Step 1 Step 3 Transformer Shelf (F) 1/4-20 x 5/8” Flat Step 2 Head Phillips Machine Screw (M)
Page 8
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Step 4 Pull Block (I) 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) Steps 5 & 6 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) Beamless Trayless...
Page 9
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Step 7 Rails Rail End Cap (T) Steps 12, 14, 16 & 21 Handset Control Switch (J) #6 x 5/8” Wood Screw (K) Transformer Shelf (F) Note: Cradle Clamp Brackets...
Page 10
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Standard Electric Power Supply and Power Cord iDrive Cable Handset Control Switch (J) Steps 12, 13 & 14 Steps 12, 14, 16 & 21 Handset Control Switch (J) #6 x 5/8”...
Page 11
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Pattern Numbers Represented: (A) Right Hand Leg (B) Left Hand Leg (C) 3AF4004* (D) 3AB4007* 3AF4020* 3AF4021* Telescope Base, Standard Electric, with Beam YBTESBTS_ and Dual Trays, Standalone, Telescope Base, Standard Electric, with...
Page 12
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Parts List, con't: (Q) 3AB401252 (R) 7196440 (S) 7434100 (P) 4A22215 Washer (P) Spacer (Q) #12 X 3/4" Flat Head Black Wood Screw (R) #14 x 1"...
Page 13
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Dual Table Assembly With Beam and Dual Utility, End Position, Plan View Dual Table Assembly With Beam and Dual Utility Antenna Telescope Installation Instructions ®...
Page 14
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Desk Rails Center Beam Upper Housing Box Dual Utility Tray Column Leg Assembly Crossbar Dual Table Assembly With Trays and Beam, End Position Exploded View Antenna Telescope...
Page 15
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric 5/16-18 x 1 1/4" Button Head Hex Machine Screw (L) Horizontal Rail Cradle (C) Step 1 Step 3 Transformer Shelf (F) 1/4-20 x 5/8"...
Page 16
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Starter Crossbar (G) or Mid Crossbar (H) Center Beam Pull Block (I) Starter Crossbar (G) Connecting Beam to Step 5 Crossbar Detail, Steps 6 & 7 Center Beam 5/16-18 x 3/4"...
Page 17
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Rails Rail End Cap (T) 1/4-20 x 5/8" Flat Head Phillips Machine Note: Cradle Screw (M) Clamp Brackets (D) in Outer Cradle Clamp Position Bracket (D)
Page 18
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Power Supply and Power Cord M6 – 1 x 14mm Flat Head Machine Screw (AA) iDrive Cable Utility Tray Bracket (Y) Handset Control Switch (J) Threaded M6-1 Spring...
Page 19
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Standard Electric Mid Crossbar (H) Worksurface Tops Dovetail Linking Bracket 1/4 - 20 x 3/4" (BB) Flat Head Machine Screws (CC) Connector Link (EE) Handset Wire Hanger Spacer (Q)
Page 20
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Pattern Numbers Represented: (D) 3AB4007* (A) Right Hand Leg (B) Left Hand Leg (C) 3AF4004* 3AF4023* 3AF4024* Telescope Base, Height Adjustable Extended Electric, without Beam and YBTEXNNS_ Trays, Standalone, Parts List:...
Page 21
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Dual Table Assembly Without Beam, Plan View Dual Table Assembly Without Beam Antenna Telescope Installation Instructions ® ™ October 2018...
Page 22
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Rails Upper Housing Box Column Leg Assembly Crossbar Dual Table Assembly Without Beam, Exploded View Antenna Telescope Installation Instructions ® ™ October 2018...
Page 23
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric 5/16-18 x 1 1/4" Button Head Hex Machine Screw (L) Horizontal Rail Cradle (C) Step 1 Step 3 Transformer Shelf (F) 1/4-20 x 5/8” Flat Step 2 Head Phillips Machine Screw (M)
Page 24
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Step 4 Pull Block (I) 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) Steps 5 & 6 5/16-18 x 3/4" Flat Head Hex Machine Screw (N) Beamless Trayless Starter...
Page 25
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Step 7 Rails Rail End Cap (T) Steps 12, 14, 16 & 21 Handset Control Switch (J) #6 x 5/8” Wood Screw (K) Transformer Shelf (F) Note: Cradle Clamp Brackets...
Page 26
Telescope Dual Table Bases without Beam Antenna Telescope ® ™ and Dual Utility Trays - Extended Electric Step 19 Spacer (Q) #12 X 3/4" Flat Head Black Wood Screw (R) Steps 12, 14, 16 & 21 Handset Control Switch (J) #6 x 5/8”...
Page 27
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Pattern Numbers Represented: (A) Right Hand Leg (B) Left Hand Leg (C) 3AF4004* (D) 3AB4007* 3AF4023* 3AF4024* Telescope Base, Extended Electric, with Beam YBTEXBTS_ and Dual Trays, Standalone, Telescope Base, Extended Electric, with...
Page 28
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Parts List, con't: (Q) 3AB401252 (R) 7196440 (S) 7434100 (P) 4A22215 Washer (P) Spacer (Q) #12 X 3/4" Flat Head Black Wood Screw (R) #14 x 1"...
Page 29
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Dual Table Assembly With Beam and Dual Utility, End Position, Plan View Dual Table Assembly With Beam and Dual Utility Antenna Telescope Installation Instructions ®...
Page 30
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Desk Rails Center Beam Upper Housing Box Dual Utility Tray Column Leg Assembly Crossbar Dual Table Assembly With Trays and Beam, End Position Exploded View Antenna Telescope...
Page 31
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric 5/16-18 x 1 1/4" Button Head Hex Machine Screw (L) Horizontal Rail Cradle (C) Step 1 Step 3 Transformer Shelf (F) 1/4-20 x 5/8"...
Page 32
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Starter Crossbar (G) or Mid Crossbar (H) Center Beam Pull Block (I) Starter Crossbar (G) Connecting Beam to Step 5 Crossbar Detail, Steps 6 & 7 Center Beam 5/16-18 x 3/4"...
Page 33
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Rails Rail End Cap (T) 1/4-20 x 5/8" Flat Head Phillips Machine Note: Cradle Screw (M) Clamp Brackets (D) in Outer Cradle Clamp Position Bracket (D)
Page 34
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Power Supply and Power Cord M6 – 1 x 14mm Flat Head Machine Screw (AA) iDrive Cable Utility Tray Bracket (Y) Handset Control Switch (J) Threaded M6-1 Spring...
Page 35
Telescope Dual Table Bases with Beam (with or Antenna Telescope ® ™ without Dual Utility Trays) - Extended Electric Mid Crossbar (H) Worksurface Tops Dovetail Linking Bracket 1/4 - 20 x 3/4" (BB) Flat Head Machine Screws (CC) Connector Link (EE) Handset Wire Hanger Spacer (Q)
Page 36
Telescope Dual Table Bases with Mixed or Fixed Base Antenna Telescope ® ™ Pattern Numbers Represented: (A) 3AF4093R* (B) 3AF4094L* YBTFS_ _ _ _ _ Telescope Base, Fixed Height, Telescope Base, Mixed Standard Electric YBTFES_ _ _ _ _ and Fixed Height, Parts List: Right Hand Fixed Column Leg Assembly Left Hand Fixed Column Leg Assembly...
Page 37
Telescope Dual Table Bases with Mixed or Fixed Base Antenna Telescope ® ™ Electric, Height- Adjustable Side Fixed Side Dual Table Assembly with Mixed Base, Plan View Antenna Telescope Installation Instructions ® ™ October 2018...
Page 38
Telescope Dual Table Bases with Mixed or Fixed Base Antenna Telescope ® ™ Electric, Height, Adjustable Side Fixed Side Rigth Hand Fixed Leg Assembly Left Hand Fixed Column Leg Assembly Dual Table Assembly with Mixed Base, Axonometric View Drop Ballast into Column Leg Assembly.
Single Sided Tables Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Pattern Numbers Represented: (C) Single Sided Crossbar, (A) Right Hand Leg (B) Left Hand Leg LH/RH, size and drilling Assembly, varies Assembly, varies Telescope Single Sided Base, Height Adjustable Standard...
Page 40
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Parts List, con't: (S) 3AB4000* (T) 3AF4017* (U) 7283140 Rail End Caps (S) Center Beam Mounting Plate (T) ¼-20 x .75" Button Head Machine Screw (U M8-1.25 x 8mm Hex Set Screw (V)) ¼...
Page 41
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Single Sided Table Assembly with Beam and Ulitity Tray Plan View Sinlge Sided Table Assembly with Beam and Utlity Tray, Axomometric View Antenna Telescope Installation Instructions...
Page 42
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Desk Rails Back Panel Center Beam Upper Housing Box Crossbar Column Leg Assembly Utility Tray Exploded Single Sided Table Base Assembly with Beam and Utility Tray, Overview Antenna Telescope Installation Instructions...
Page 43
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Ride Side Shown Assembled Step 3 Right Hand Column Transformer Shelf (G) Leg Assembly (A) ¼-20 x 5 " Flat Head Phillips Machine Screw (L) Step 2 Housing Cover (F) Horizontal Rail Cradle (D)
Page 44
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Single Sided Crossbar, Left Hand (C) Single Sided Crossbar, Left Hand (C) Step 6 & 7 Center Beam Mounting Plate (T) Center Beam ¼-20 x .75"...
Page 45
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Step 11 Single Sided Back Panel -18 x .75" Button Head Crossbar Bracket, LH (AA) Hex Machine Screw (DD) Step 13 & 14 M6-1 Spring Nut (Y) -18 x .75"...
Page 46
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Rails Rail End Caps (S) Note: Cradle Clamp Brackets (E) in Outer Position ¼-20 x " Flat Head Phillips Machine Screw (L) Cradle Clamp Brackets (E) Horizontal Rail Cradle (D) Exploded Single Sided Table Base Assembly,...
Page 47
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application M6-1 Spring Nut (Y) Utility Tray Bracket (X) Step 19 Threaded Inserts Step 20 ¼-20 x " Flanged Button Head Hex Machine Screw (W) M6-1 x 14mm Flat Head Machine Screw (Z) Utility Tray...
Page 48
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Stand-Alone Application Worksurface Top Step 31 Handset Control Switch (I) #6 x " wood screws (J) Step 29 Spacer (P) #12 x ¾" Flat Head Black Wood Screw (Q) Step 30 #14 x 1"...
Page 49
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Side by Side Application Pattern Numbers Represented: (C) 3AF4009* (A) 7283140 (B) 7418440 Telescope Single Sided Base, Height Adjustable Standard YBTSSFESBNL_ Electric, with Beam Only, Left Hand, Telescope Single Sided Base, Height Adjustable Standard YBTSSFESBNR_ Electric, with Beam Only, Right Hand,...
Page 50
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Side by Side Application Single Sided Table Assembly with Beam and Utility Tray, Side by Side Application, Plan View Single Sided Table Assembly with Beam and Utility Tray, Side by Side Application, Axonometric View Antenna Telescope...
Page 51
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Side by Side Application Desk Rails Center Beam Upper Housing Box Back Panel Connector Link Crossbar, "Connected" Location Utility Tray Column Leg Assembly Crossbar, "End" Location Exploded Single Sided Table Base Assembly with Beam and Utility Tray, Side by Side Application, Overview...
Page 52
Telescope Single Sided Table Bases with Beam Antenna Telescope ® ™ (with or without Utility Tray), Side by Side Application Crossbar drilled inside only, for leg, beam & tray Step 1 ¼-20 x ¾" Flat Head Phillips Machine Screw (B) Dovetail Linking Brackets (C) Exploded Single Sided Table Base Assembly, Side by Side Application, Connection Overview...
(J) Handset Control Switch (K) 7528496 (L) 4A22212 YBTYEXBT2_ _ Connections, J1 Digital: 3AF4103 3AF4103 C1 KNOLL DIGITAL HANDSET J2 Standard up/down: 3AF4102 Telescope Base, Height Adjustable Extended 3AF4102 C2 KNOLL STANDARD HANDSET 3AF4103 C1 KNOLL DIGITAL HANDSET 3AF4102 C2 KNOLL STANDARD HANDSET...
Page 54
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) Parts List: (S) 7434100 (T) 3AB4000* (U) 3AF4017* Right Hand Column Leg Assembly (A) Left Hand Column Leg Assembly (B) Horizontal Rail Cradle (C) Cradle Clamp Bracket (D) Housing Cover (E) Transformer Shelf (F) Starter Crossbar (G)
Page 55
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) 120 Triad Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Plan View 120 Triad Table Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Axon View Antenna Telescope Installation Instructions...
Page 56
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) Desk Rails Housing Box Mini Crossbar 120 Degree Column Leg Assembly Center Beam Dual Utility Tray Crossbar Column Leg Assemblies, LH/RH 120 Triad Assembly with Beam and Dual Utility Trays, 1 Crossbar Connection, Partially Exploded Overview Antenna Telescope...
Page 57
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) -18 x 1 ¼" Button Head Hex Machine Screw (L) Horizontal Rail Cradle (C) Step 1 Step 3 Transformer Shelf (F) ¼-20 x " Flat Step 2 Head Phillips Machine Screw (M)
Page 58
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) Step 4 Step 6 Outer Crossbar (G/H) Center Beam Mounting Plate (U) ¼-20 x ¾" Button Head Machine Screw (V) Step 5 Pull Block (I) Step 6 &...
Page 59
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) Step 11 Step 10 Step 12 & 13 (2) ¼-20 x " Flat Head 120 Degree Center Phillips Machine Screws (M) Rail Cradle, RH (HH) -18 x 1-¾"...
Page 60
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) Step 14 & 15 Center Beam Mounting Plate (U) ¼-20 x ¾" Button Head Machine Screw (V) M8-1.25 x 8mm Hex Set Screw (W) Mid Position Assembly Connection to Outer Position Assembly, Partially Exploded Detail, Steps 14 &...
Page 61
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) NOTE INTENTIONAL GAP: Rail End is " from the back wall of the cradle cavity. Step 18 Step 19 ¼-20 x " Flat Head ¼-20 x "...
Page 62
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) 120 Degree Y Bracket (JJ) with Threaded Inserts Utility Tray Step 24 M6-1 Spring But (Z) Utility Tray Bracket (Y) M6-1 x 14mm Flat Head Machine Screw (AA) Step 23 ¼-20 x...
Page 63
Telescope 120˚ Triad with Beam Antenna Telescope ® ™ (with or without Dual Utility Trays) INSTALL THE HEIGHT ADJUSTMENT ENSURE COLUMNS ARE PLUMB ELECTRICAL COMPONENTS: THROUGHOUT RANGE OF TRAVEL: INSTALL TOPS: 25. For each station, decide if the Handset To avoid issues that may arise if columns are 34.
Page 64
Antenna Telescope ® ™ Worksurface Top Step 36 Handset Control Switch (J) (2) #6 x " Wood Screw (K) Step 34 Spacer (Q) #12 x ¾" Flat Head Black Wood Screw(R) Step 35 #14 x 1" Flat Head Wood Screw (S) 120 Triad Table Assembly, Partially Exploded, Steps 31-36 Step 31 Dovetail Linking...
Page 66
Antenna Telescope Telescope Return Bases ® ™ Dual table Assembly with Return on One Side, Plan View Note: Follow installation steps for Telescope Dual Table Bases before proceeding with the assembly of the return. Dual table Assembly with Return on One Side Antenna Telescope Installation Instructions...
Page 68
Antenna Telescope Telescope Return Bases ® ™ Step 4 ¼-20 x " Flat Head Phillips Machine Screws (N) Cradle Clamp Bracket (C) Step 1 -18 x 1 1/4" Button Head Hex Machine Step 3 Screws (O) Transformer Shelf (E) Horizontal Rail Cradle (B) ¼-20 x "...
Page 69
Antenna Telescope Telescope Return Bases ® ™ Step 7 End Cap with Step 6 Support Tab (I) Shorter Rail Return Rail Hook Top Bracket (G) Longer Rail ( User Front) Steps 5, 8 & 9 Rall End Cap (J) Longer Rail (User Front) PREPARE THE RAILS Note...
Page 70
Telescope Return Bases Antenna Telescope ® ™ Step 10 & 16 Step 13 Main to Return Tie End Cap with "W" Bracket (F) Support Tab (I) #14 x 1" Flat ¼ -14 x 7/8" Pan Head Head Wood Machine Scews (M) Screw (L) Pre-drilled Return Top...
Page 72
Antenna Telescope Telescope Y-Base Adjustable Height Tables ® ™ INSTALL THE HEIGHT ADJUSTMENT LEVEL TABLES: AFFIX HANDSET MANAGE POWER CABLES ELECTRICAL COMPONENTS 13. Place the tables in their final positions 16. Using (2) #6 x " wood screws (N) mount and level by extending the leveling the Handset Control to the underside 9.
Page 73
Antenna Telescope Telescope Y-Base Adjustable Height Tables ® ™ Column Leg Assembly Dual Base Stretcher Hub Weldment Spoke Step 4 Step 1 Square Tube -18 x 1.5" Hex End Cap (B) Socket Machine Screw (H) Step 3 Glide Assembly (A) Step 2 ¾...
Page 74
Antenna Telescope Telescope Y-Base Adjustable Height Tables ® ™ Step 7 ¼-20 x " Flat Head Tranformer Shelf (D) Machine Screws (I) Top Support Bracket, Right Hand (F) Step 5 - 18 x 2.25" Phillips Head Machine Screw (K) Cable Clip (G) Step 8 10 x ¾"...
Page 76
Antenna Telescope Telescope Y-Base Adjustable Height Tables ® ™ Table Top Step 17 Table Base Assembly Use P-clamp kit to tack cables to the tabletop Handset Control Step 12 #14 x 1" Flat Head Wood Screw (M) Step 13 Glide Assembly (A) Step 16 #6 x "...
End Panels Telescope End Panels for Dual Tables Antenna Telescope ® ™ Pattern Numbers Represented: (A) 3AF4111* (B) 3AF4009 (C) 3AF4114 (D) 3AF4112R* Telescope End Panel, YEP____ Parts List: End Panel Connector Link (A) Dovetail Linking Bracket (B) End Panel Block (C) End Panel Leg Brace, Right Hand (D) End Panel Leg Brace, Left Hand (E) NOTE...
Page 78
Antenna Telescope Telescope End Panels for Dual Tables ® ™ End Panel Adjustable Dual Tables (Intermediate Application Base) Telescope End Panels, Installed End Panel Adjustable Dual Tables (End Application Base) Single Telescope End Panel, Installed on Single Table Antenna Telescope Installation Instructions ®...
Page 79
Antenna Telescope Telescope End Panels for Dual Tables ® ™ Adjustable Dual Mid Crossbar End Table Base Dovetail Linking Brackets (B) with ¼-20 x .75" Flat Head Machine Screws (G) (previously installed) Step 9 Step 1 & 8 End Panel Connector Link ¼-20 x .5", Black Flat Head Screw (I) Conector Link Connection to Crossbar,...
Page 80
Antenna Telescope Telescope End Panels for Dual Tables ® ™ Step 2 Dovetail Linking End Panel with Glides Bracket (B) Step 2 ¼-20 x .75", Flat Head Machine Screw (G) Step 5 End Panel Connector Link (A) Step 9 ¼-20 x .75" Flat Head Machine Step 4, 6, &...
Page 81
Telescope End Panels for Single Sided Table Antenna Telescope ® ™ Pattern Numbers Represented: (C) 3AF4114* (A) 3AF4111* (B) 3AF4009* Telescope End Panel, for Standard Electric Base, Left YEPTSSFESL_ _ Hand, Telescope End Panel, for Standard Electric Base, Right YEPTSSFESR_ _ Hand, Telescope End Panel, for Extended Electric Base, Left YEPTSSFEXL_ _...
Telescope End Panels for Single Sided Table Antenna Telescope ® ™ LH Back Panel, LH End Panel, RH Base LH Back Panel, RH End Panel, RH Base Single Sided Base Assembly with Back & End Panels Plans View Single Sided Base Assembly with Back & End Panels, Single Sided Base Assembly with Back &...
Page 83
Telescope End Panels for Single Sided Table Antenna Telescope ® ™ Center Beam Upper Housing Box End Panel (RH Shown) Back Panel (RH Shown) End Panel Leg Brace Crossbar, "End Panel" Location Crossbar, "End" Location Column Leg Assembly Utility Tray Single Sided Base Assembly with Back &...
Page 84
Telescope End Panels for Single Sided Table Antenna Telescope ® ™ *Note addition for Step 14: 10-24 x .35 Bushing (M) #10-24 x 3/ Zinc Flat HEad Shoulder Screw (L) Steps 2 & 9 End Panel Connector Links (A) Step 1 ¼-20 x .75"...
Page 85
Telescope End Panels for Single Sided Table Antenna Telescope ® ™ Step 3 #5 x ¾ Flat Head Wood Screw (K) Keyhole Plate (J) Step 7 End Panel (RH shown) Step 4 Step 4 ¼-20 x .75" Flat Head Dovetail Linking Bracket (B) Machine Screw (G) Step 2 &...
Telescope Fixed Center Screen, Antenna Telescope ® ™ Glass, Laminate or Veneer Pattern Numbers Represented: (A) 3AB4021 (B) 4A22238 (C) 4A22239 YPSCT_ _ G Fixed Center Screen, Glass, YPSCT_ _ _ Fixed Center Screen, Laminate or Veneer, YPSCTGT_ Vertical Alignment Trim for Glass Screens, Parts List: Spring Nut (A) M6 x 35mm Button Head Machine Screw (B)
Page 90
Telescope Fixed Center Screen, Antenna Telescope ® ™ Glass, Laminate or Veneer Fixed Center Screen, Glass, Laminate, or Veneer Telescope Table Assembly Fixed Center Screen, Glass, Laminate, or Veneer, Installed Upper Beam Slot " hole, drilled vertically down through the center of the upper beam slot, all the way through the center of the lower beam slot.
Page 91
Telescope Fixed Center Screen, Antenna Telescope ® ™ Glass, Laminate or Veneer Fixed Center Screen, Glass, Laminate, or Veneer Beam Telescope Table Assembly (partial) Exploded Telescope Table (Partial) with Glass, Laminated or Veneer Screen Spring Nut (A) Step 3 NOTE: Tab removed Washer (C) Step 4, 6 &...
Page 92
Telescope Fixed Center Screen, Antenna Telescope ® ™ Glass, Laminate or Veneer Vertical Alignment Trim Adhesive Tape Tape Liner (peel from tape) Alignment Trim Detail Alignment Trim Alignment Trim Installation shown on Multiple Glass Screen Installation Antenna Telescope Installation Instructions ®...
Power and Cable Management Telescope Z-Managers Antenna Telescope ® ™ Pattern Numbers Represented: Z-Manager, Standard Electric Height Range, YR1TZES Z-Manager, Extended Electric Height Range, YR1TZEX Parts List: Upper Mount Top Bracket (A) Upper Mount Management Bracket (B) Lower Mount Bracket (C) Lower Mount Engagement Block (D) Lower Mount ¼-20 Hex Nut (E) (E) 4A22228...
Page 100
Telescope Z-Managers Antenna Telescope ® ™ TROUBLESHOOTING THE CORD CHANNEL: 11. Similarly, insert the Lower Corrugated Strap (H) 13. Similarly, insert the lower portion of the into the lower extrusion of the subassembly (F). strap assembly into the beam mounted 15.
Page 101
Telescope Z-Managers Antenna Telescope ® ™ NOTE: cords will always lie OUTSIDE the upper strap bend Brackets installed directly above one another "S" configuration "Z" configuration NOTE: cords will always lie INSIDE the lower strap bend Z-Managers, Axonometric View From Below, Back to Back Configuration. Note symmetry: "Z"...
Page 102
Telescope Z-Managers Antenna Telescope ® ™ Worksurface Back Edge Upper Mount Top Bracket (A) Step 2 #8 x ¾" Pan Head Sheet Metal Screw (I) Upper Mount Management Bracket (B) Steps 3 & 12 #8 x 1½" Pan Head Sheet Metal Screw (K) Upper Corrugated Strap (G) Steps 10 &...