Knoll Antenna Telescope Installation Instructions Manual page 99

Telescope Communications
Mounting Plate
Pattern Numbers Represented:
Telescope Communications
Mounting Plate, YR1TCMP
Parts List:
Mounting Plate (A)
Clamping Bracket (B)
B-32 x .625 Flat Head Machine Screw (C)
Pre-assembled Telescope Table
with Dual Utility Tray
Tools Needed:
Manual Ratcheting Phillips Head Screwdriver
STEPS
1. Build the communications mounting
plate assembly by loosely attaching (2)
clamping brackets (B) to the back of the
mounting plate (A) with (2) B-32 x .625 flat
head machine screws (C). Do not tighten
screws. Keep the clamping brackets (B)
oriented in parallel with the mounting plate.
©2021 Knoll Inc.
(A) 3AF5034*
2. Insert the mounting plate assembly
into the data tray. Rotate the clamping
brackets so they are vertical and fit
behind the lip of the data tray.
POWER A ND DATA M A N AGEMENT
(B) 3AF5009* (C) 4A22237
3. Tighten the B-32 x .625 flat head machine
screws (C) until the communications
mounting plate is secure in the data tray.
Antenna Telescope Installation Instructions
99