Knoll Generation Assembly Instructions

Generation by Knoll
ASSEMBLY INSTRUCTIONS
No tools required.
1. Open carton and remove chair base
and protective divider piece.
2. Place chair base upright on floor, stabilizing it
so it does not move or slide.
3. Remove top of carton. Lift upper chair assembly
from carton in a safe fashion.
4. Carefully place upper chair assembly onto cylinder,
fitting cylinder into hole in bottom of control. Press
down firmly to ensure secure fit.
5. Without adjusting seat depth or height, sit in chair
to complete assembly.
WARNING:
FAILURE TO FOLLOW THESE ASSEMBLY INSTRUCTIONS CAN RESULT
IN PRODUCT FAILURE, PERSONAL INJURY OR PROPERTY DAMAGE.
®
knoll.com/seating