Knoll Antenna Telescope Installation Instructions Manual page 4

Introduction
Using the Antenna
Installation Instructions and Parts Manual
An Overview
Each section of the Installation Instructions
and Parts Manual contains information to
guide you through Antenna
®
installations and to help you determine which
parts you may need to order as replacements
or to supplement reconfigurations.
Each page contains the
following sections:
The Parts List section contains a lettered
list of the essential component parts
required for the application's installation.
Items required that may vary in size, (i.e.
worksurfaces or rails), have not been lettered,
and replacements should be ordered
directly from the Price List or by contacting
Field Services for the correct part.
The Tools Needed section contains
a list of the installation tools that will be
required on site for the proper installation
of the application or configuration.
A Graphic Section has been included,
to the right of the Parts List, depicting
images of the component parts with
lettered codes that correspond to those
in the Parts List. Each part is shown with
its associated part number above.
NOTE: Part numbers with an asterisk, i.e.
*, after the number require a paint finish
code to be added to the end of the pattern
number to be orderable as a replacement
part. Please refer to the Finish Code listing at
the end of this page for the available codes.
NOTE: Part numbers with empty brackets,
i.e. (_), after the pattern number indicate
that a laminate or veneer finish code must
be added to the end of the pattern number
to be orderable as a replacement part.
Please refer to the Finish Code listing in the
Antenna™ Workspaces Price List for the
available finish codes for those products.
©2021 Knoll Inc.
Telescope
® ™
Please note that not all parts are
available in all finishes. Finish options
available for component parts match
Telescope™ those available when ordered with the
complete items' pattern number per the
Antenna™ Workspaces Price List.
The Steps section details step-by-
step instructions for the installation of
the application selected. Each step
includes references to the lettered items
noted in the Parts List at the top of the
page and in the graphic section.
A Drawings section follows the steps
section providing detailed assembled
and exploded drawings to further
assist in installation and in determining
replacement parts required.
How to Order Parts
1. Look in this document's bookmarks
to locate the configuration which
best fits the application.
2. Go to the page where that application
is described and thoroughly review all
installation instructions to determine
the part number(s) needed.
3. Unless otherwise noted, the standard
package quantity is one (1). When
ordering products where the quantity
per package is listed, please indicate
the number of packages required in
the quantity column of your order.
4. Be sure to add "KR" to the
beginning of each part number.
5. Be sure to include any finish
codes required to complete
the pattern number(s).
6. Complete a Knoll Service order,
which can be sent to your Knoll
Customer Service Representative.
A NTENN A TELESCOPE
®
If you have any questions about the
contents of this manual, please call
your Customer Service Representative
or Field Service at 800-343-5665.
Paint Finish Codes:
111T - Jet Black
112T - Brown
113T - Dark Grey
114T - Folkstone Grey
115T - Medium Grey
116T - Sandstone
117T - Soft Grey
118T - Bright White
611T - Beige Metallic Mist
612T - Medium Metallic Grey
613T - Silver
130T - Dark Red
131T - Slate Blue
Antenna Telescope Installation Instructions
4
™