Knoll Antenna Telescope Installation Instructions Manual page 21

Hide thumbs Also See for Antenna Telescope:

Telescope Dual Table Bases with Beam

(with or without Dual Utility Trays) - Extended Electric

Rail End Cap (T)

1/4-20 x 5/8"

Flat Head Phillips

Machine Screw (M)

Cradle Clamp

Bracket (D)

Horizontal

Rail Cradle (C)

11. Install (8) Rail End Caps (T) onto the ends

of the rails using a rubber mallet.

12. Prepare the leg cradles for the rails by

fastening (2) Cradle Clamp Brackets (D)

loosely to each cradle (C) using (4) ¼-20 x

5/8" flat head Phillips machine screws (M)

per cradle.

Rails

Note: The cradle clamp brackets (D) are

ALWAYS to be placed in the outer position

in the cradle (C), and the end is to be flush

with the face of the housing cover (E).

Dual Table Base with Beam, Rail

Installation, Steps 11 ,12, 13, 14 & 15

Antenna Telescope Installation Instructions

DUAL TABLE BASES

Note: Cradle

Clamp Brackets

(D) in Outer

Position