Knoll Antenna Telescope Installation Instructions Manual page 19

Telescope Dual Table Bases with Beam
(with or without Dual Utility Trays) - Extended Electric
5/16-18 x 1 1/4" Button Head
Hex Machine Screw (L)
Step 1
Right Hand Column
Leg Assembly (A)
Exploded Table Base With Beam and
Dual Utility Trays Assembly, Steps 1-3
STEPS
Note: Before assembly, determine if table
is "standalone", "end", or "intermediate" in
application.
PREPARE LEGS & CROSSBARS:
1. Attach (2) Horizontal Rail Cradles (C) to the
upper housing boxes on the Right Hand
and Left Hand Column Leg Assemblies
(A/B), with (2) 5/16-18 x 1 1/4" button head
hex machine screws (L) per cradle.
©2021 Knoll Inc.
Horizontal Rail
Cradle (C)
Step 2
Housing
Cover (E)
1/4-20 x 5/8"
Flat Head
Phillips Machine
Screw (M)
2. Attach a Housing Cover (E) to the short
end of each housing, using (2) 1/4-20 x
5/8" flat head Phillips machine screws (M)
per cover.
3. Attach a Transformer Shelf (F) to the
opposite side of each housing, using (2)
1/4-20 x 5/8" flat head Phillips machine
screws (M) per shelf. w
DUAL TABLE BASES
Step 3
Transformer
Shelf (F)
1/4-20 x 5/8"
Flat Head Phillips
Machine Screw (M)
Left Hand
Column Leg
Assembly (B)
Antenna Telescope Installation Instructions
19