Knoll Antenna Telescope Installation Instructions Manual page 15

Telescope Dual Table Bases with Beam
(with or without Dual Utility Trays) - Extended Electric
Pattern Numbers Represented:
Telescope Base, Extended Electric, with Beam
and Dual Trays, Standalone, YBTEXBTS_
Telescope Base, Extended Electric, with
Beam and Dual Trays, End, YBTEXBTE_
Telescope Base, Extended Electric, with Beam
and Dual Trays, Intermediate, YBTEXBTI_
Telescope Base, Extended Electric, with
Beam Only, Standalone, YBTEXBNS_
Telescope Base, Extended Electric, with
Beam Only, End, YBTEXBNE_
Telescope Base, Extended Electric, with
Beam Only, Intermediate, YBTEXBNI_
Parts List:
Right Hand Column Leg (A)
Left Hand Column Leg (B)
Horizontal Rail Cradle (C)
Cradle Clamp Bracket (D)
Housing Cover (E)
Transformer Shelf (F)
Starter Crossbar (G)
Mid Crossbar (H)
Pull Block (I)
Handset Control Switch (J)
#6 x 5/8" Wood Screw (K)
5/16-18 x 1 1/4" Button Head Hex Machine Screw (L)
1/4-20 x 5/8" Flat Head Phillips Machine Screw (M)
5/16-18 x 3/4" Flat Head Hex Machine Screw (N)
5/16-18 x 2" Button Head Hex Machine Screw (O)
©2021 Knoll Inc.
(A) Right Hand Leg (B) Left Hand Leg
3AF4023* 3AF4024*
(E) 3AF4003* (F) 3AF4002*
(H) Mid crossbar (varies-
(I) 3AF4060
H1 beam, H2 beam with
tray)
H1: 3AF404704*
H2: 3AF404706*
(K) 7528496 (L) 4A22212
(N) 4A22216 (O) 4A22214
DUAL TABLE BASES
(C) 3AF4004* (D) 3AB4007*
(G) Starter crossbar (varies –
G1 beam, G2 beam with tray
G1: 3AF404703*
G2: 3AF404705*
(J) Handset Control Switch
J1 Digital: 3AF4103
J2 Standard up/down:
3AF4102
(M) 7189140
(P ) Toggle Handset:
3AF4248
Antenna Telescope Installation Instructions
15