Fayat Group Dynapac CA25 Instruction Manual page 99

1
Fig. Hydraulic reservoir.
1. Filler neck
2. Sight glass.
Fig. Drum, left side
Fig. Cartridge, left side
1. Filler plug
2. Drain plug
3. Sight glass
02-17-2021
Hydraulic reservoir - Oil change
2
Fill with the new hydraulic oil (1). See the lubricant
specifications for more information on quality.
Start the diesel engine and test the hydraulic functions.
Check the oil level in the reservoir (2) and, if necessary,
complete the level.
Drum cartridge - Oil change
Parking the roller on a flat surface so that the filler plug (1)
is perpendicular.
Place a receptacle for about 5 liters (1.32 gal) under the
drain plug (2).
Observe care when draining drum oil/hot drum oil.
Wear protective gloves and goggles.
Save the oil and hand in to an environment-friendly
waste disposal station.
Clean and unscrew the filler plug (1) and the drain plug
(2).
Allow all the oil to run out. Fit the drain plug and fill with
new lubricant oil.
See the lubricant specifications for more information on
quality.
4812325897EN
Maintenance – 2000 h
99