Fayat Group Dynapac CA25 Instruction Manual page 50

13
1
Fig. Positioning:
1. Chocks.
02-17-2021
Switching off
Check the controls and warning lamps to see if there
are any indications of malfunction (13). Turn off all
lights and other electrical functions.
Set the speed selector (8) to neutral and let the
engine run for about one minute.
Activate the parking brake (3).
8
Turn the ignition key to left to the off position 1. At the
end of the work turn, and lock the control panel cover.
1
Parking
Master switch
Before leaving the roller for the day, switch the
master switch (1) to the disconnected position and
remove the key. This will prevent battery discharging
and will also make it difficult for unauthorized
persons to start and operate the machine. Also lock
the hood to the engine compartment.
Chocking the drums
Never disembark from the machine when the is
engine running, unless the parking brake is
activated.
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the
drums if the roller is parked on sloping ground.
Remember the risk of freezing during the
winter. Fill the engine cooling system and the
screen wash bottle in the cab with suitable
anti-freeze
maintenance instructions.
4812325897EN
Operation – Braking
mixtures. See also the
50