Fayat Group Dynapac CA25 Instruction Manual page 5

5
General
This manual
operation and maintenance.
The machine must be correctly maintained for maximal
performance.
The machine should be kept clean so that any
leakages, loose bolts and loose connections are
discovered at as early a point in time as possible.
Inspect the machine every day, before starting. Inspect
the entire machine so that any leakages or other faults
are detected.
Check the ground under the machine. Leakages are
more easily detected on the ground than on the
machine itself.
THINK ENVIRONMENT! Do not release oil, fuel
and other
substances into the environment. Always send
used filters, drain oil and fuel remnants to
environmentally correct disposal.
This manual
maintenance, can be performed by the machine
operator.
Additional instructions for the engine can be
found in the manufacture's engine manual.
CE marking and Declaration of conformity
(Applies to machines marketed in EU/EEC)
This machine is CE marked. This shows that on delivery
it complies with the basic health and safety directives
applicable for the machine in accordance with
machinery directive 2006/42/EC and that it also
complies with
applicable for this machine.
A "Declaration of conformity" is supplied with this
machine, which specifies the applicable regulations and
directives with supplements, as well as the harmonized
standards and other regulations that are applied and
according to the regulations must be declared in writing.
4812325897EN
Introduction
contains instructions
environmentally
contains instructions
other regulations
for machine
hazardous
for periodic
and directives
02-17-2021