Fayat Group Dynapac CA25 Instruction Manual page 42

Fig. Instruments panel:
2. Emergency stop;
13. Control panel;
Fig. Operator's station:
1. Seat belt;
2. ROPS structure;
3. Rubber element;
4. Anti-slip.
02-17-2021
13
Before starting
2
Pull out the emergency button (2).
Turn the key to position 3.
Check that the panel warning lights (13) are turn on.
Operator position
If a ROPS (2) (Roll Over Protective Structure) or a cab
is fitted to the roller, always wear the seat belt (1)
provided and wear a protective helmet.
4812325897EN
Check whether the emergency stop button (2) is
pulled out.
When the machine is in neutral or when there is
no load on the operator's seat, the automatic
brake function is activated.
Replace the seat belt (1) if it shows signs of wear
or has been subjected to high levels of force.
Check that rubber elements (3) on the platform
are intact. Worn elements will impair comfort.
Ensure that the anti-slip (4) on the platform is in
good condition. Replace where anti-slip friction
is poor.
If the machine is fitted with a cab, make sure that
the door is closed when in motion.
Operation - Starting
42