Fayat Group Dynapac CA25 Instruction Manual page 32

Fig. Start screen
Fig. Transport mode
02-17-2021
Machine description – Instruments/Controls
Functional description – Display
When the ignition key is activated to position 1, a start
screen is visible in display (Fig. 1). This is shown for a few
seconds and then switches over to the status screen.
The transport mode menu appears when one of the three
function keys on the right of the screen is activated.
Work mode
The work screen provides information on the direction of
travel (2), hour meter (3) and fuel level (4).
Work direction
The icon has three options (F, N, R) and is located in the
upper left corner of the Display (2).
 N (neutral) – Indicates that the lever is in the Neutral
position.
 F ( ) – An arrow facing left in front of the "F"
Forward
appears on the display.
 R (
) - An arrow facing right in front of the "R"
Reverse
appears on the display.
Hour meter
The "hourglass" icon appears on the left side of the screen
indicating the hour meter. The number of hours appears to
the right of the icon (3).
Fuel level
The fuel level is indicated in percentage % on the bar to
the right of the display.
When you reach the first fuel bar (from bottom to top), it
means that the system has 10% of its total capacity, so the
warning led lights up indicating that you must refuel (5).
4812325897EN 32