Fayat Group Dynapac CA25 Instruction Manual page 78

Fig. Level check - planetary
gear
1. Level/Filler plug
Fig. Level check - planetary
gear (Anti-Slip differential)
1. Level/Filler plug
Fig. Drum, left side
1. Filler/drain plug
Fig. Cartridge, left side
1. Filler plug
2. Drain plug
3. Sight glass
02-17-2021
Rear axle planetary gears - Check oil level
Position the roller so that the level plug (1) in the planetary
gear is at "9 o'clock".
Wipe clean and remove the level plug (1) and check that
the oil level reaches the lower edge of the plug hole. Top
off with oil to the right level if the level is low. Use
transmission oil. See lubrication specification.
Clean and refit the plug.
Check the oil level in the same way on the rear axle's other
planetary gear.
Drum cartridge - Checking the oil level
Position the roller on a flat surface with the plug (1) and
drum number plate (2) are visible on the right side.
The oil level should now reach the sight glass (3).
If necessary, remove the plug (1) and fill to the
middle of the sight glass.
Clean the magnetic filler plug (1) of any metallic residue,
before refitting the plug.
Refer to the correct oil grade in the lubricant specification.
Do not overfill with oil - risk for overheating.
4812325897EN
Maintenance – 250 h
78