Fayat Group Dynapac CA25 Instruction Manual page 28

# Designation
1. Ignition key
2. Emergency stop
3. Vibration on/off
4. Manual compartment
5. Forward & Reverse lever
6. Seat switch
7. Control protection
8. Membrane panel
9. Traffic lights switch (optional)
02-17-2021
Machine description – Instruments/Controls
Symbol Function
Positions 1-2: Off position, the key can be removed.
Position 3a: All instruments and electrical controls
receive power. The machine is equipped with automatic
heating, which occurs in this position.
Position 3c: Starter motor activation.
Brakes the roller and switches off the engine. The power
supply goes off. When starting the machine, the
emergency stop must be inactive.
To activate the vibration, simply press and release the
button.
Press again to turn the vibration off. First, you need to set
high or low amplitude on the control panel.
Pull and open the top of the compartment to access the
manuals.
When starting the machine, the lever must be in neutral.
The engine cannot be started if the forward/reverse lever
is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is move
backward, the roller moves backward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever is
from the neutral position, the higher the speed.
Stay seated whenever you operate the machine. When
the operator stands up during operation, the alarm is
triggered. After 3 seconds, the brakes are activated and
the engine stops.
Below the instrument plate to protect from weather
conditions and sabotage. Can be locked.
Detailed information on how it operates is given below.
When pressed in the top position, the traffic lights will
be on. When pressed down in the lower position, the
parking lights will be on.
4812325897EN 28