Fayat Group Dynapac CA25 Instruction Manual page 34

Fig. Submenu - Fault codes
Fig. Fault code list
02-17-2021
Machine description – Instruments/Controls
Submenu - Fault codes
1. The alarm symbols are on the left side of the control
panel. The red warning symbol is on the top and the
yellow symbol is on the bottom (1).
The side menu appears when the submenu is
2.
selected.
3. Now pass to the user settings submenu.
4. The center button (4) on the side menu shows a
downward arrow. Selecting this button brings up a list
of error codes.
When the last error code appears, scroll the list back
up to the first error code.
5. The Active Start mode appears when you change the
direction of the travel.
6. If the submenu remains inactive for more than 20
seconds, the screen will return to the Active Start
menu.
7. When an "OK" appears in the box to the right below,
the screen will go blank.
8. When you select "OK", the initial Active Start mode will
appear.
9. A Red or Yellow control lamp acts as a reminder until
the error is corrected.
4812325897EN 34