Fayat Group Dynapac CA25 Instruction Manual page 75

Fig. Wheels
1. Air valve
2. Wheel nuts
02-17-2021
Tires - Air pressure check / Wheel nuts
tightening
Check the tire pressures using a pressure gauge.
If the tires are filled with fluid, the air valve (1) must be in
the "12 o'clock" position during pumping.
Recommended pressure: refer Technical Specifications.
When changing the tires, it is important that both of them
have the same rolling radius. This is necessary to ensure
proper functioning of the anti-slip in the rear axle
Check the tightening torque of the wheel nuts (2) at 630
Nm (465 lbf.ft).
Check both wheels and all nuts. (This only applies
to a new machine or newly fitted wheels).
Check the safety manual that accompanies the
roller before filling the tires with air.
4812325897EN
Maintenance, 50 h
75