Fayat Group Dynapac CA25 Instruction Manual page 68

1
1
Fig. Coolant reservoir
1. Marks min. and max.
2. Filler cap
1
Fig.1 – Diesel engine oil level
Fig. Hydraulic reservoir oil level
1. Sight glass
02-17-2021
Check fluids levels
2
The coolant reservoir is located beside the hydraulic oil
reservoir and is easier to observe from the right side of
the machine
The filler cap (2) is accessible from above the engine
hood.
Check the coolant level with the engine shut off and cold.
Check that the coolant level is between the max. and min.
marks. (1).
Fill with a mixture of 50% water and 50% anti-freeze. See
the lubrication specifications in these instructions and in
the engine manual.
Pull up the dipstick (1) and check that the oil level is
between the upper and lower marks. For further details,
refer to the engine's instruction manual
1
The sight glass is located on the right side of the hood
behind the operator's seat.
Place the roller on a level surface and check that the oil
level in the sight glass (1) is between the max and min
markings. Top up with the type of hydraulic fluid specified
in the lubricant specification, if the level is too low.
4812325897EN
Coolant level - Check
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Diesel engine - Check oil level
Take care not to touch any hot parts of the
engine or the radiator when removing the
dipstick. Risk for burns.
Hydraulic reservoir - Check oil level
Maintenance, 10 h
68