Fig. User settings
Fig. Work mode - Vibration
Machine with standard equipment
Fig. Forward Command
02-17-2021
Machine description – Instruments/Controls
User settings
Users can change the light settings (6), choose between
the Metric or Imperial system (7).
Work mode - Vibration
The selection of the different work modes takes place by
pressing the respective button (2) on the Control Panel.
Compaction mode
Compacting status active on the roller (8).
Automatic Vibration Control (AVC)
Press one of the buttons (9) on the end of the panel. An
arrow will appear to the right (10).
Press the upper button (9) to display the submenu.
Pressing the lower button (9) activates the AVC (11) to
which after activated its icon will appear in the lower right
corner of the display. To activate the vibration, click on
button (12).
4812325897EN
33