Fayat Group Dynapac CA25 Instruction Manual page 98

Fig. Oil drain - Planetary gear:
1. Filler /level plug
2
Fig. Oil filler – Planetary gear:
2. Filler /level plug.
02-17-2021
position.
Clean, unscrew the plug (1) and drain the oil into a suitable
receptacle. The volume is approximately 2 liters (2,1 qts).
.
Position the roller so that the plug (1) in the planetary gear
is at "9 o'clock".
Clean and remove the plug.
Fill with oil to lower edge of level hole. Use transmission
oil. See the lubrication specification.
Clean and refit the plug (1).
Check the fluid level in the same way on the rear axle's
other planetary gear.
4812325897EN
Maintenance – 2000 h
Rear axle planetary gear - Oil drain
Position the roller with the plug (1) at its lowest
Deliver the drain oil to environmentally correct
handling.
Rear axle planetary gear - Oil change / Oil filler
98