Fayat Group Dynapac CA25 Instruction Manual page 94

1
2
3
Fig. Engine compartment.
4. Air radiator
5. Oil radiator
6. Cooling radiator
1
Fig. Sterring hitch
1. Nut
02-17-2021
Radiator - Check/Cleaning
Check that air can pass unobstructed through the radiators
(1), (2) and (3).
Clean a dirty radiator using compressed air or a high-
pressure water jet.
Blow air or direct water through the cooler in the opposite
direction to that of the cooling air.
Be careful when using a high-pressure washer - do not
place the nozzle too close to the radiator.
Wear protective
compressed air or high-pressure water jets
Steering hitch – Tightening
Nobody must be allowed near the steering joint
when the engine is running
when the steering is operated. Switch off the engine
and activate the parking brake before lubrificating.
The easiest way to identify if you have this type of
steering hitch is that has a new type of nut (1) at the top
as shown.
Actual torque (Nm) should be when the machine's
position is straight ahead.
M16 174 Nm
4812325897EN
Maintenance – 1000 h
goggles when working
.
Risk of being crushed
with
94