Fuel Pump Replacement - Polaris ACE 900 2017 Service Manual

Table of Contents

Advertisement

9. If the pump still does not operate, check for correct
ECU operation by plugging in a known-good ECU of
the same model.
NOTICE
If the pump still does not operate, replace the fuel pump
assembly.
9929422 R02 - 2017-2019 ACE 900 Service Manual
© Copyright Polaris Industries Inc.

FUEL PUMP REPLACEMENT

WARNING
Always wear safety goggles when working with high
pressure or flammable fluids. Failure to do so could
result in serious injury or complications.
1. Remove the seat to access the fuel pump.
2. Disconnect the battery (-) negative cable.
3. Ensure that static has been discharged from you by
touching a ground source such as the engine or
frame.
4. Remove the fuel pump cover by pulling up on the
front edge.
5. While holding a shop towel over the fuel line
connector, disconnect the quick connect fuel line
from the fuel pump.
CAUTION
It is possible for pressurized fuel to be present when
disconnecting the fuel line.It is recommended to allow
the vehicle to sit for a period of one hour after shutting
off the engine before servicing the fuel pump. This
allows the exhaust to cool and fuel pressure to drop.
NOTICE
A small amount of fuel may come out of the fuel line or
tank. Properly drain fuel into a suitable container.
FUEL SYSTEM
4
q
4.25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ace 900 2018Ace 900 2019Ace 900 xc 2017

Table of Contents