Change Laterality Information - Canon CXDI-1 Operation Manual

7. Processing the Image (QA Mode Screen)

7.7.3 Change Laterality Information

3
Set the orientation.
Touch the orientation button to open the orientation window and make the setting.
Display/Button
FLIP
ROTATE
Link Setting and orientation
If the Link Setting has been set to [ENABLE], the changes will not be reflected even if
you touch [SAVE PARAM] after changing the orientation.
4
Close the ORIENTATION window
Touch [OK].
Free annotation
When the image has been rotated or flipped, free annotations may be outside the
image.
1
Flips the image horizontally.
Touch and highlight (white character) [Marker].
When Marker is enabled, Annotation is enabled and
The selected contents are reflected to the Annotation and DICOM Output.
When the Link setting (→ Setup Guide) is set to [ENABLE], Link is displayed.
2
Select laterality.
Touch the required button ( ,
When Link is displayed, the display position of the linked annotation is also switched
automatically.
Button
Indicates the orientation of the image using
viewing a patient facing the CXDI from the x-ray
generator side.
Flips the image vertically.
Flips the image horizontally.
Rotates the image 90° counterclockwise.
Rotates the image 180°.
Rotates the image 90° clockwise.
, or ). The annotation view is switched.
Laterality Information
Left
Right
Unpaired
Both Left and Right
– 82 –
Description
, , and can be selected.
Annotation Display
L
R
No display
when