3. Output Control (Process Viewer)
In the process viewer, the output status is displayed in study units, and the output destination
and the order of priority can be changed.
1
Display the process viewer.
From the exposure screen, touch [SYSTEM] > [PROCESS VIEWER].
Item
State
Time
Patient ID
Patient's name
Printer
2
Select a study.
Touch a study. The image output process will stop and [UNSELECT] or [MODIFY] will
be displayed. ([MODIFY] will be displayed only when a printer or storage has been
selected as the output destination.)
To restart the image output process, touch [UNSELECT].
Process Viewer Screen
IDLE
Image is waiting to be output.
QA
Image is being processed.
SEND
Image is being transferred.
*
Priority
Date and time the first image of the patient was taken.
Patient ID
Patient's name
p1
Printer 1 or 3
p2
Printer 2 or 4
s1
Storage 1 or 3
s2
Storage 2 or 4
– 31 –
Description
Continued on the following page >>