Introduction; Document Information; System Documentation; Stylistic Conventions - Canon OMNERA 400T Operator's Manual

1 Introduction

1.1 Document information

It is important to keep this document for the life of the equipment, and pass the document on
to any subsequent holder or user of the equipment.
The original version of this manual was written in the English language.
Training is provided by Arcoma AB. Training material is the Operation manual and the Instal-
lation and service manual.

1.1.1 System documentation

The following documentation is available for the system:
TM
• OMNERA
• OMNERA TM
• OMNERA TM

1.1.2 Stylistic conventions

All warning label texts are shown in italic style in this manual.
All references are shown in italic style in this manual.

1.1.3 Document producer

This document has been produced by:
Arcoma AB
Annavägen 1
S–352 46 VÄXJÖ,
Sweden
www.arcoma.se

1.1.4 Text emphasis

WARNING!
All texts labelled with "WARNING" call attention to potential risk to health or life.
CAUTION!
All texts labelled with "CAUTION" contain information about dangerous situations
and measures to avoid risk.
Note!
All texts labelled with "NOTE" contain additional information regarding the work step, and is
provided for a better understanding or as a warning about unnecessary and avoidable
difficulties.
Operator´s Manual
2020-09-18
400T Planning guide
400T Installation and service manual
400T Operator´s manual
0180-095-418-EN Rev. 6.1
Page 1
Introduction
Document information
OMNERA®