Table of Contents
Advertisement
4
Display the process selection dialog box.
Touch [Reject].
When the multiview screen is displayed, directly touch the image to open the window,
and then touch [Reject].
5
Display the rejection reason input window.
Touch [CHANGE REJECT REASON].
6
Select or enter the rejection reason.
Select the rejection reason from the Reject Reason List.
If the reason you want to enter is not found in the Reject Reason List, touch the Reject
Reason input box to display the keyboard, and then enter the reason.
7
Change the rejection reason.
Touch [OK].
8
Output the images.
Touch [RESEND] or [RESEND ALL]. The RESEND window or RESEND ALL
window is opened. Set LOCAL TEMP STORAGE to [ON], and then touch [RESEND]
or [RESEND ALL].
B. Using the Rejection Reason Input Function
Process Selection Dialog Box
– 147 –
Advertisement
Table of Contents
