Canon CXDI-1 Operation Manual page 40

3. Output Control (Process Viewer)
3
Open the CHANGE DESTINATION window.
Touch [MODIFY].
[MODIFY] will not be displayed if no output destination has been set.
4
Set the output destination.
[ON] will be displayed for devices that have been set as output destinations. Touch [ON]
for devices to which the image will not be output to set these to [OFF].
However, note that if you select [OFF] and close the window, that device will not be
displayed and you will not be able to return it to [ON] the next time the window is
opened.
5
Set the priority.
Each time you touch [Priority], the button switches between highlighted display (white
characters) and normal display. The selected study is given output priority when this
button is highlighted.
6
Close the CHANGE DESTINATION window.
Touch [OK]. A window will open and the confirmation message "Do you want to
change the settings?" will be displayed. Touch [OK].
7
Return to the menu screen.
Touch [EXIT].
CHANGE DESTINATION Window
– 32 –