Operations Available On Qa Screen - Canon CXDI-1 Operation Manual

7. Processing the Image (QA Mode Screen)

7.2 Operations Available on QA Screen

NOTE: After performing QA processing and touching [OK] to exit the QA screen, it
may not be possible to return to parameters even after touching [RESET].
Touching or at the bottom of the QA screen switches the display options at the bottom
between the commands [RESET] and [OK] and the commands [OPTION], [SAVE PARAM],
Frequency Processing ([Standard Frequency Processing], [MLT(F) Frequency
Processing], [MLT(M) Frequency Processing], and [MLT(S) Frequency Processing]).
To set the image processing parameters
Touch the tabs to set the parameters.
The parameters cannot be changed for images loaded from external storage media in the
study list.
To adjust the trimming area or density adjustment area (→ page 68)
Touch [Adjust TRIM]/[Adjust ROI] to select the range.
To display a magnified image (→ page 92)
Touch [MAG] or [QA-MAG].
To adjust the gamma correction of the operation unit (→ page 93)
Touch [OPTION]
To return the parameters to their original values
Touch [RESET].
LUT Tab
– 66 –