Canon CXDI-1 Operation Manual page 108

8. Calibration
When data processing results in an error
A window is opened, and an error message is displayed.
After checking the error details, touch [OK] to close the window.
Touch [EXIT] to cancel calibration, or [RETAKE] to perform calibration again.
When the grid stripes have been detected in the course of the calibration of
the CXDI-40G COMPACT
A window is opened, and an error message is displayed.
After checking the error details, touch [OK] to close the window.
To cancel calibration, touch [EXIT]; to perform calibration again, check that the grid
has been removed, and then touch [RETAKE].
3
Exposure is completed.
When the last exposure is completed, the message "Please wait." is displayed, and data
processing is started.
– 100 –