Taking An Image - Canon CXDI-1 Operation Manual

2. Taking an Image

NOTE: The LANMIT sensor in the sensor unit will be gradually depleted if the
camera is left in the READY condition. Therefore, touch [CANCEL] or [END
STUDY] to cancel the exposure.
When the CXDI starts up, the exposure screen (tray type screen or category type screen) is
displayed.
Exposure Screen (Category Type Screen)
CXDI exposure starts from this exposure screen. Basically, all you have to do to take an image
is enter patient data and then select an exposure mode.
The taken image will appear and can be checked on the operation unit.
The following pages describe the exposure modes and methods for viewing and outputting
images.
Preview Image Screen
– 9 –