Entering The Rejection Reason During Retake - Canon CXDI-1 Operation Manual

4
5
B.2.2 Entering the Rejection Reason during Retake
When retaking an exposure, the image selected for retake always becomes a reject image.
1
2
Select or enter the rejection reason.
Select the rejection reason from the Reject Reason List.
If the reason you want to enter is not found in the Reject Reason List, touch the Reject
Reason input box to display the keyboard, and then enter the reason.
Rejection reason
If the image was already rejected in the past, its rejection reason is entered.
Reject the image.
Touch [OK].
When the preview image screen is displayed, the rejection reason is displayed on the
image.
It is not displayed in the multiview screen.
Display the preview image screen.
Touch a preview image button on the exposure screen.
The image can be displayed immediately after exposure for certain settings.
Display the image that will be retaken.
Touch a preview image button.
– 137 –
B. Using the Rejection Reason Input Function
Preview Image Screen
Continued on the following page >>