Canon CXDI-1 Operation Manual page 21

7
Change the study information as necessary.
Touch [STUDY INFO.]. The study information screen appears.
Touch the frame for each item to display the software keyboard, change the setting and
touch [OK].
Note that if the study is ended without saving the changes, the changes will be discarded
and the settings will return to the original contents.
Study information saved during study
When new values other than the study description are entered at the study information
screen during the study, the entered values will be automatically saved by touching
[OK] and quitting the study information screen.
[STUDY INFO.] display conditions
[STUDY INFO.] for choosing study information is displayed when any item in the
[STUDY INFO.] screen (→ Setup Guide) is set to [ENABLE] or when the user
authentication function (→ Setup Guide) is activated.
8
Finalize the patient data.
Touch [OK].
However, the exposure screen does not appear in the following cases even if [OK] is
selected.
• When items set to [ESSENTIAL] in STUDY INFO. have not been entered, or when
[Automatically show study data input screen] has been selected, the study
information screen will appear instead.
• When items set to [ESSENTIAL] in ESSENTIAL DATA have not been entered, a
warning message will appear.
To change patient data
Touch [PATIENT] on the exposure screen to correct patient data, or [CANCEL] to
clear the data that has been entered.
Study Information Screen
– 13 –
2. Taking an Image
Continued on the following page >>