Selecting And Changing The Exposure Mode; Selecting An Exposure Mode - Canon CXDI-1 Operation Manual

2.2 Selecting and Changing the Exposure Mode

2.2.1 Selecting an Exposure Mode

1
2
Select the sensor unit.
If multiple sensor units can be used, first select a sensor unit by touching that sensor unit
button.
Case when exposure mode is selected automatically
When AUTO-PRESS (→ Setup Guide) has been set to [ENABLE], the sensor unit
and exposure mode will be selected automatically when the patient data is entered.
Touch the required exposure mode button on the tray.
On the category type screen, touch the category tab of the category in which the required
exposure mode is found.
If there are six or more categories, use or to scroll through them.
– 15 –
2. Taking an Image
Continued on the following page >>