Changing Generator Parameters After Exposure Mode Selection - Canon CXDI-1 Operation Manual

2. Taking an Image
2.2.2 Changing Generator Parameters after Exposure Mode
Selection
1
Display the parameter changing screen.
Touch [CHANGE] on the exposure screen.
2
Select the tab.
Touch the tab containing the parameters to be changed.
3
Set the parameters.
Refer to Setup Guide and change the parameters.
If the values of the parameters do not change successively
If [ENABLE] has been selected in PARAMETER TABLE (→ Setup Guide), only
the values set there will be available as options.
4
Save the parameters as necessary.
To save the current conditions as default parameters for the chosen exposure mode, touch
[SAVE PARAM].
Entering a password
If a window opens and password entry (→ Setup Guide) is requested, touch the
password frame to display the Password screen and enter the password.
5
Return to the exposure screen.
Touch [OK].
Parameter Changing Screen
– 18 –