1. Starting Up/Shutting Down the CXDI
1.1 Starting Up the CXDI
1.1.1 Turn ON the Power
1.1.2 Welcome Message
Turn ON the power while referring to the hardware manual.
When the [LOGIN] screen appears
Depending on the installation setup by a service engineer, the LOGIN screen (→ page
131) may be displayed when the CXDI is started up.
Input the user name and password, then touch [OK].
1
The welcome message appears.
Note, this message will only appear if the check box ( ) next to Show next time was
selected the last time the power was turned OFF, or if HELLO DIALOG (→ Setup
Guide) is set to [DISPLAY].
To disable displaying the Welcome message at start-up
If you do not want the welcome message to appear the next time you use the
equipment, touch the check box ( ) to clear it.
2
Close the welcome message.
Touch [CLOSE] to close the welcome message.
Welcome Message Window
– 3 –