Table of Contents
Advertisement
Changing the exposure parameters on the tray type screen
On the tray type screen, the exposure parameters can also be changed by using
.
They can also be changed by touching the parameter frame and entering the value from
the ten key or parameter table.
NOTE:
If the sensor unit has been attached or removed on the exposure screen after
changing parameters and the parameter changing screen, the values of
generator parameters that have been changed will be lost and the READY
condition of the exposure screen will be canceled.
Note, however, that if [SAVE PARAM] has been applied for changed values,
values changed will be loaded when selecting the exposure mode.
Parameter Table
– 19 –
2. Taking an Image
and
Advertisement
Table of Contents
