Table of Contents
Advertisement
10. Before Calling a Service Engineer
Error
Code
Resend Error
-601
File may have been automatically deleted.
Sensor Unit: Detect Error
-5100
Check the sensor power unit or cable connection.
Sensor Unit: Detect Error
-5101
Check the sensor unit cable connection. If you want to recover the system, shut
it down.
Grid Error
-5102
Remove Grid for this exposure.
Grid ID Error
-5202
Replace with the recommended grid (Grid Name).
Installed grid: (Grid Name).
Grid ID Error
-5203
This is a none-grid mode. Remove the grid.
Grid ID Error
-5206
This is a fixed-grid mode. Attach the grid.
Grid ID Error
-5207
This is a moving-grid mode. Attach the grid.
Error Message (Upper box: Error type
Lower box: Error description)
– 118 –
Remedy
Touch [OK] to close the window.
Touch [OK] and shut down the system (see 1.2
Shutting Down the CXDI (→ page 5)).
Check the cable connections.
If the cause cannot be found, note the error
code and contact a Canon representative or
distributor.
Touch [OK] to close the window and remove
the grid from the sensor unit.
Touch [OK] to close the window and check the
grid in the sensor unit.
Touch [OK] to close the window and remove
the grid from the sensor unit.
Touch [OK] to close the window and attach the
grid to the sensor unit.
Advertisement
Table of Contents
