Canon CXDI-1 Operation Manual page 125

Error Error Message (Upper box: Error type
Code
External Storage Error
The exposed images cannot be stored because the size of folder partition is
-514
smaller than the exposed images. Use a new disk, erase the folder contents or
enlarge the folder size and retry.
Internal Storage Error
-517
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
Internal Storage Error
-518
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
External Storage Error
-519
Capacity of external storage memory is insufficient. Retry after making a space
in the disk.
Internal Storage Error
-520
Exposed image cannot be stored, because the capacity of internal storage
memory is insufficient.
Queue File Open Error
-521
Queue file is not found.
Reject Info Output Error
-533
Selected directory for reject list can only be read. Reject info cannot be saved
on the file.
Reject Info Output Error
-535
Selected directory for reject list does not exist, or attribution is incorrect. Reject
info cannot be saved on the file.
Reject Info Output Error
-537
The file format for reject list includes incorrect strings. Reject info cannot be
saved on the file.
Storage Commitment Result Error
-544
Receipt of the storage commitment failed.
Storage Commitment Result Error
-545
Storage commitment failed.
External Storage Error (folder name)
An error has occurred in DICOMDIR. Files may have been destroyed. Call a
-549
service person. The DICOMDIR functions will remain canceled until the system
is restarted.
File Open Error
-599
File is not found.
Lower box: Error description)
– 117 –
10. Before Calling a Service Engineer
Remedy
Touch [OK] to close the window, finish the
study, and output the image.
Also, see Setup Guide, and check that the
maximum storage space of the external storage
media is set to an appropriate setting.
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Touch [OK]. Replace the external disk and try
again.
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Continued on the following page >>