Table of Contents
Advertisement
10. Before Calling a Service Engineer
10.1 Fatal Error
Error
Code
Sensor Unit: SelfCheck Error
-100
Detected an Error.
Capture Board SelfCheck Error
-101
Detected Capture Board Error.
Capture Device Open Error
-102
Failed to open capture device.
READ Timeout Error
-103
Failed to transmit data.
Do not disconnect sensor during data transmission.
Requested I/O pending error
-104
Failed to access the device.
CXDCAP.INI Open Error
-105
Install CXDCAP.INI file.
Capture Board SelfCheck Error
-106
Detected Capture Board Error.
Power Supply Error
-107
Shuts down after 10 seconds.
File Open Error: (file name)
-522
File is not found.
Error Message (Upper box: Error type
Lower box: Error description)
– 112 –
Remedy
Touch [OK] to close the window, and then see
1.2 Shutting Down the CXDI (→ page 5),
and turn off the CXDI.
If [SHUTDOWN] is displayed, touch it. The
system will automatically shut down.
When these errors occur, note the error code
and contact a Canon representative or
distributor.
Advertisement
Table of Contents
