Retaking An Image - Canon CXDI-1 Operation Manual

4.5 Retaking an Image

NOTE:
If you are dissatisfied with the current image, it can be retaken using the same exposure mode.
1
2
3
The rejection reason input function may be available for certain service
engineer settings.
For details on operation of this function, see B. Using the Rejection Reason
Input Function (→ page 135).
Display the preview image screen.
Select [RETAKE].
Touch [RETAKE]. A window will open and the confirmation message "The original
image will be rejected. Do you want to retake the image?" will be displayed. Touch
[OK]. The exposure screen appears and the system enters the ready condition with the
same exposure mode selected as that used for the current image.
You cannot select a different exposure mode for retaking the image.
Notes on Retaking Images
Depending on the installation setup by a service engineer, the window may not be
displayed.
Retake the image.
The image displayed in step 1 will be rejected.
4. Browsing Images (Preview Image Screen)
Preview Image Screen
– 41 –
Continued on the following page >>