Rejecting A Bad Image; Checking Images On The Preview Image Screen - Canon CXDI-1 Operation Manual

5.3.2 Rejecting a Bad Image

When an image has been rejected, the output destination is limited to local temporary storage.
1
2

5.3.3 Checking Images on the Preview Image Screen

1
2
Open the window.
Directly touch an image on the right side of the screen to open the window.
Reject the image.
Touch [Reject]. An "X" will appear in place of the output number of the image, and the
image will be set to rejected.
When an image is rejected, the output order of that image cannot be changed, but the
output order of the other images will change.
However, when an image that was rejected as a result of retaking is made the valid image, a
window will open and the confirmation message "The No.n image [Exposure Mode] will
be rejected. ("n" is the exposure number of the valid image.)" will be displayed.
Touch [OK].
Open the window.
Directly touch an image on the right side of the screen to open the window.
Display the preview image screen.
Touch [Preview]. This changes to the preview image screen or CALL IMAGES screen
(during image playback from the study list).
5. Viewing Multiple Images (Multi-View Screen)
Reject
– 47 –