B. Using the Rejection Reason Input Function
B.1 Rejection Reason Input Function
Advanced setting by a service engineer is required to use the rejection reason input function.
When this function is set, the user must input the reason when an image is rejected (→ page
40) during exposure.
The entered rejection reason is output to a CSV (Comma Separated Value) format file (except
when reproduced from the study image list).
CSV format file output
Information other than the rejection reason can be output to a CSV format file if the
setup has been performed by the service engineer.
For details, please contact a Canon representative or distributer.
Rejection Reason Input Window
– 135 –