Processing The Image (Qa Mode Screen); Displaying The Qa Screen - Canon CXDI-1 Operation Manual

7. Processing the Image (QA Mode Screen)

7.1 Displaying the QA Screen

In the CXDI series, image processing is called QA (Quality Assurance) processing, and the
image can be optimized by adjusting the parameters on the QA screen.
You can access the QA screen in one of the following ways:
To set the QA mode screen to appear automatically after the exposure
From the exposure screen, select [SYSTEM] > [SETUP MENU] > [SYSTEM
SETUP], and in the DISPLAYING PARAMETER CHANGE/QA SCREEN DURING
EXPOSURE, set the QA Screen to [VALID].
To perform QA processing after the exposure
Touch [QA] on the preview image screen (→ page 35).
To perform QA processing after completing the study
Load the image from the study list (→ page 53), and then touch [QA].
QA Mode Screen
– 65 –