System Menu Reference - Cal Power IT-M3400 Series User Manual

1.7 System Menu Reference

Press [Shift]+[P-Set](System) to enter into the system menu interface. At this
point, the VFD screen displays the system menu items. Each menu item has a
numbering identifier. The user can press Up and Down buttons or use the knob
for scrolling display of other menu items. Press [Enter]on a menu interface to
enter the setting interface. Press [Esc]to return to the previous menu. The
instrument return to home-screen automaticly when no action in a long time.
The description of the menu items is shown in the table below.
System System menu
Beep
PowerOn
Sense
I/O Config Select the interfaces communicating with PC and display dynamic
Set the beeper state.
Off
On
Set the power-on state.
Reset
Last
Last+Off
Set the sense measurement function
Off
On
information of different interface card.
None
USB+LAN
USB
LAN
Copyright © Itech Electronic Co., Ltd.
Turn the beeper off.
Turn the beeper on.
When the instrument is powered on, the instrument
will initialize some settings and [On/Off] state.
When the instrument is powered on, the instrument
will remain the same settings and [On/Off] state as
last time you turned off the instrument.
When the instrument is powered on, the instrument
will remain the same settings as last time you turned
off the instrument, but the [On/Off] is OFF state.
Turn the sense function off.
Turn the sense function on.
No optional communication interfaces.
When insert IT-E1206 communication board into
expansion slot, the menu displays this information.
USB communication interface.
USB-TMC protocol
TMC
Virtual serial port
VCP
LAN communication interface.
Lan Info View the LAN information.
Status
IP Mode Status
IP Addr
Sub Net
Quick Reference
8