Cal Power IT-M3400 Series User Manual page 70

Table of Contents

2. Rotate the knob and select Batt Emulator. Press [Enter] key and enter the

3. Rotate the knob to select running battery emulation file (Run), recalling bat-

4. Select different functions for setting. For details, refer to the introduction of

Edit battery emulation file

1. In the setting interface of battery emulation function, select Edit, and enter

2. At first, select the number of file to be edited. A maximum of 10 battery emu-

3. Edit the following parameters of this battery emulation file in successive.

battery emulation function setting page.

tery emulation file (Recall) and editing battery emulation file (Edit) in

successive.

Run

Recall

specific operation.

the battery emulation file editing menu.

lation files can be edited in this instrument.

Edit Emul = 1/10

Press [Enter] key to confirm setting.

1: Cell Properties

2: Parallel =1

3: Series =1

4: I_Limit + = 2.00A

5: I_Limit – = –2.00A

6: - -EXIT- -

•

Cell Properties: Set the battery properties, including full-state voltage val-

ue, empty-state voltage value, internal resistance value and capacity val-

ue. The user can conduct setting based on battery specifications to be

emulated.

•

Parallel: This function can emulate the state of several batteries in paral-

lel connection. For example, when "2" is set, the battery emulated in the

instrument is a battery group composed of two batteries in parallel

connection.

•

Serial: This function can emulate the state of several batteries in serial

connection. For example, when "2" is set, the battery emulated in the in-

strument is a battery group composed of two batteries in serial

connection.

Edit

Advanced Function

Table of Contents