Cal Power IT-M3400 Series User Manual page 21

RS232
+CAN
RS485
+Ext
GPIB
USB
Set the instruments to parallel operation mode.
Parallel
Single
Slave
Copyright © Itech Electronic Co., Ltd.
Lan Save
When insert IT-E1207 communication board into expansion
slot, the menu displays this information.
RS232 RS232 communication interface.
Display as the following format: baud rate_data bit_
parity bit_stop bit.
•
Select the baud rate from the following options:
4800, 9600, 19200, 38400, 57600, 115200
•
The data bit, parity bit and stop bit are fixed: 8_
None_1
CAN CAN communication interface.
Select the baud rate from the following options: 20k,
40k, 50k, 80k, 100k, 125k, 150k, 200k, 250k, 400k,
500k, 1000k.
Address: Set the instrument address to a number
from 1 to 127.
When insert IT-E1208 communication board into expansion
slot, the menu displays this information.
Analog Set external analog interface state.
RS485 RS485 communication interface.
Display as the following format: baud rate_data bit_
parity bit_stop bit.
•
Select the baud rate from the following options:
4800, 9600, 19200, 38400, 57600.
•
The data bit, parity bit and stop bit are fixed: 8_
None_1.
•
RS485 Addr: Set the instrument address to a
number from 1 to 127.
When insert IT-E1205 communication board into expansion
slot, the menu displays this information.
Address: Set the instrument address to a number from 0 to 30.
When insert IT-E1209 communication board into expansion
slot, the menu displays this information.
Set the instrument to single mode.
Set the instrument to slave mode.
No
Yes
Select whether to save the LAN setting
or not.
No
Yes
Quick Reference
10