Cal Power IT-M3400 Series User Manual page 30

AC Power Input Level
This series power supplies operate at the following AC power input.
•
•
Connecting the Power Cord
To connect the power cord:
1. Make sure that the front-panel power switch is in the OFF position.
2. Connect the female end of the supplied line cord to the AC receptacle on the
3. Connect the plug of the power cord to a grounded AC outlet.
China United States &
IT-E171 Canada & Japan
Option Opt.01: 220VAC ± 10%, 47 to 63 Hz
Option Opt.02: 110 VAC ± 10%, 47 to 63 Hz
rear panel.
Copyright © Itech Electronic Co., Ltd.
IT-E172
Inspection and Installation
Europe England
IT-E173 IT-E174
19