Cal Power IT-M3400 Series User Manual page 59

•
On Delay is from the time that a command to turn on the output is received
until the output actually turns on.
•
Off Delay is from the time that a command to turn off the output is received
until the output actually turns off.
The procedures to set the output delay time are as follows.
1. Press [Shift]+[V-set](Config) to enter into the configuration menu interface.
2. Rotate the knob to select On Delay or Off Delay and [Enter].
3. Use right and left keys or knob to set the delay time and press [Enter] to
confirm.
4. Press [Esc] to exit.
Copyright © Itech Electronic Co., Ltd.
Output Function
48