Cal Power IT-M3400 Series User Manual page 15

Keys
[V-set]
[I-set]
[P-set]
[R-set]
[On/Off]
[Enter]
[Esc]
Composite key [Shift], combined with other keys to realize functions marked
above keys. The detailed functions are listed as follows.
Keys
[Shift]+[V-set](Config)
[Shift]+[I-set](Function)
[Shift]+[P-set](System)
Copyright © Itech Electronic Co., Ltd.
Description
Set the voltage value
In CV priority (default) mode, press [V-set] and set the
output voltage value. In CC priority mode, press[V-set]
and set the upper limit of voltage.
Set the current value
In CV priority, press [I-set] and enter the current value
setting state. Repress [I-set] and setting the I+ limit and I-
limit. In CC priority, press [I-set] to setting the output
current.
Set the power value
Set the resistance value.
Power supply output on/off key
Operation confirmation key.
Press this key to cancel the present input or exit the
present operation interface.
The left navigation keys is used to adjust the cursor to the
specified position or scrolls pages to view menu items.
Long pressing this key and enter to save function, and
key is light.
The right navigation keys is used to adjust the cursor to
the specified position or scrolls pages to view menu items.
Long pressing this key and enter to recall function, and
key is light.
Description
Enter the Config menu. Used to set the
configuration parameters.
Enter the Function menu. Used to set the list
function, Battery test function.and battery
simulation..
Enter the system menu. Used to set the system
parameters.
Quick Reference
4